No SIM card error

Potential solutions:

• Try toggling Airplane mode on and off again.
• Restart your iPhone by turning it off and on again.
• If you recently inserted the SIM card and started getting the error then there’s a chance it’s damaged or dirty. Try popping it out and taking a look. You can use a pencil eraser to clean the gold contacts and then blow away the debris before putting it back in your iPhone.
• Make sure that your software is fully up to date via Settings > General > About.
• Try the SIM card in another device if you have a compatible device, or try a different SIM card in your iPhone 6.
• If the problem persists then contact your carrier or Apple.

Step 1: Prepare your iPhone for restoration
Connect your iPhone to your computer via USB and click the gray Back Up Now button when viewing the Summary tab for your given device in iTunes. Alternatively, follow our guide on how to use iCloud to back up the device you Apple’s remote servers. Although backing up your device is not necessary, doing so will store your photos, apps, contacts, settings, and other data so you can automatically restore other iOS devices from the backup down the line.
Step 1: Access the Reset menu
Tap the main Settings icon when viewing the homescreen, select the General option on the resulting menu and tap the Reset button at the bottom of the next page.
Step 2: Reset your iPhone  
Tap the blue Erase All Content and Settings option second from the top, followed by the red Erase iPhone option in the resulting pop-up window to confirm the decision.
Step 3: Ensure the phone was restored
Once the restoration process is complete — a process that may take up to several minutes — check to ensure the phone has been restored to the original factory settings. If done correctly, you’ll once again be presented with the iOS Setup Assistant upon startup, from which you can then restore your phone from backup or continue the process as if setting up a new phone entirely.

Step 1: Prepare your iPhone for restoration
Click the iTunes menu located on the left side of the main iTunes toolbar, select Check for Updates from the resulting drop-down menu and ensure you have the latest version of iTunes. If not, download and install the latest version thereof. Afterward, connect your iPhone to your computer via USB and click the gray Back Up Now button when viewing the Summary tab for your given device in iTunes. Alternatively, follow our guide on how to use iCloud to back up the device you Apple’s remote servers. Although backing up your device is not necessary, doing so will store your photos, apps, contacts, settings, and other data so you can automatically restore other iOS devices from the backup down the line.
Step 2: Restore your iPhone
Once the backup is complete, click the gray Restore iPhone button when viewing the Summary tab for your given device in iTunes. Click the Restore button in the resulting pop-up window to confirm your decision, and if prompted, click the Agree button to agree to the software license agreement and begin downloading the necessary iOS software file before restoring.
Step 3: Ensure the phone was restored
 Once the restoration process is complete — a process that may take up to several minutes — check to ensure the phone has been restored to the original factory settings. If done correctly, you’ll once again be presented with the iOS Setup Assistant upon startup, from which you can then restore your phone from backup or continue the process as if setting up a new phone entirely. It’s like it just came off the assembly line at Foxconn all over again.

 

 

Problem: Home button not working

If pressing the home button on your iPhone doesn’t always get a response, then the device may have a problem, even if the issue is intermittent.
Solution:

• Apple is apparently aware of a manufacturing issue with the Home button on some iPhone models. Make an appointment with the Genius Bar at your local Apple Store to discuss the issue.

 

 

 

 

Create a Hotspot to Tether Any Device With Wi-Fi

If you have a Mac, scroll down — you can do this more easily. But you can connect any type of device to the Internet through your iPhone. This means Windows laptops, Chromebooks, Android tablets, iPads, portable gaming consoles, and more — anything at all that can connect to Wi-Fi.
To get started, open your iPhone’s Settings screen and tap the Personal Hotspot option between Cellular and Carrier near the top of the screen. If you don’t see the option, contact your carrier — it’s possible you have to pay them extra before you can see and use it.
Enable the Personal Hotspot feature and your iPhone’s top bar will turn blue, indicating that the personal hotspot is running in the background and draining your battery.
Your iPhone will now appear as a nearby wireless network. On any device with a Wi-Fi connection, open the list of networks and choose your device in the list — it’ll be named something like “[Name]’s iPhone.” Select it in the list and you’ll be asked for a passphrase. Enter the passphrase displayed on the Personal Hotspot screen on your iPhone. Your device will connect.
When you’re done, pick up your iPhone and disable the Personal Hotspot feature to save battery life. This is easy — your iPhone’s top bar will be blue as long as the Personal Hotspot feature is enabled. Tap it and you’ll be taken directly to the Personal Hotspot screen, where you can disable it.

Easy Wi-Fi Tethering on a Mac

Mac OS X Yosemite makes these things work well together. Click the Wi-Fi icon on the menu bar, and you’ll see your nearby iPhone appear under “Personal Hotspot.” Click it, and your Mac will automatically connect to the iPhone, enabling the Wi-Fi hotspot feature and allowing you to connect directly to the Internet.
This is convenient because it allows you to quickly connect to your iPhone from your Mac without leaving the personal hotspot feature enabled all the time. You can do this entirely from your Mac without picking up your iPhone and tapping anything. It’s only enabled when you connect to it. This saves battery life.

USB Tethering on a Mac

You can also connect your iPhone to your computer via a USB cable — not a bad idea, as the iPhone can draw power from your Mac and its battery won’t be run down by the tethering.
Go into your iPhone’s Setting screen, tap Hotspot, and Personal Hotspot near the top of the list, and enable Personal Hotspot. You can then click the WI-Fi icon on the menu bar and select Open Network Preferences. You’ll see that your Mac is tethered to the iPhone using the “iPhone USB” connection. If you don’t see it in the list, click the “+” button and add the iPhone USB network interface.

USB Tethering on Windows

USB tethering can al;so function with a Windows PC. You’ll need the latest version of iTunes installed on your Windows PC to do this, as it includes the appropriate drivers. Enable Personal Hotspot on your iPhone and then connect it ot the Windows PC using a USB cable. Your Windows PC will be able to use the iPhone as a network connection, just as a Mac could.
This should automatically configure itself if you plug your iPhone in with Personal Hotspot enabled. You’ll see the network connection appear as an “Apple Mobile Device Ethernet” connection.

---

iPhones also support Bluetooth tethering. Pair your iPhone with a computer or other device over Bluetooth to share the Internet connection using Bluetooth. Wi-Fi tethering will be easier to set up and faster. However, Bluetooth tethering could potentially drain your iPhone’s battery more slowly, saving some battery life.

 

 

 

Solution 1: How to Put Music on iPhone 6/6s (Plus) with iTunes

• Plug your iPhone 6 (Plus) into your computer with a USB cord. Your computer will automatically recognize your iPhone and will launch iTunes.
• Click on the iPhone logo under "Devices" on the left-hand side of the screen in iTunes.
• Click on the "Music" tab.
• Choose "Entire Music Library" to put all of your music from iTunes to your iPhone 6 (Plus); Choose "Selected Playlists, Artists, and Genres" to add certain artists or playlists to your iPhone 6 (Plus).
• Click on the "Sync" button.

Note: iTunes could be your first choice to put music to your iPhone 6 (Plus), however, it may erase your existing music while syncing. And it won't support transferring music from your old iPhone to your new iPhone. With AnyTrans, all could be completed within few clicks!

Solution 2: How to Put Music on iPhone 6/6s (Plus) without iTunes

Another highly recommend option to put music on your iPhone 6 (Plus) is to use a third party app - AnyTrans. AnyTrans could be a great manager to manage your iPhone 6 (Plus) music and other types of contents. Why?
- Allows you to transfer music from computer to iPhone 6 (Plus) without erasing the existed iOS data. And it supports all the iPhone modes.
- Helps you upgrade to new iPhone 6 (Plus) with ease - you can sync almost all the personal info and media data from your old iPhone to the new one, such as, music, videos, photos, apps, contacts etc.
- Provides you great iCloud backup management experience which gives you the access to iCloud, and even download the specific items to the computer, including photos, contacts, messages, notes, bookmarks etc.
1. Go to download & install AnyTrans, and plug your iPhone 6/6s into your computer.
2. Launch AnyTrans, and on the homepage of AnyTrans, click "Audio" button, and then choose "Music".
3. Click the add button, and browse the music on your computer, then click open to start transferring.

Unlock iCloud Lock Permanently via IMEI Code on iPhone

 

 

This is official service to Unlock iCloud lock on iPhone 6 5s 5c 5 4s 4 permanent.If you have experienced it on first hand to have iCloud locked device then you know that it prevents you from using your iPhone 6,6+,5S,5C,5,4S,4 or iPad device. But, iCloud lock can also lock iDevice of users who forgot their information for their accounts or who bought iPhone from eBay or some similar sites where the original owner forgot to remove his information from it. Now, two ways exist to safely remove and bypass iCloud lock screen and the activation account in order to make the iPhone function normally again. The easiest way to remove the iCloud Lock is to take your iDevice to some Apple store with ownership proof but in most cases the owners do not have this document so that is why there is a new method which works amazingly and which is meant for bypassing and removing iCloud account screen and activation lock in order to make you able to use your iPhone as if it was newly bought.

Factory Unlock iCloud Lock on your Apple Device

So if you bought it your iPhone from friend, eBay or second-hand and the previous owner still has his information data stored then the Bypass and Disable iCloud Lock screen is the best method to use to remove the iCloud lock permanently.
To factory remove the Bypass iCloud Account activation Lock you just need to follow our simple instructions bellow:

• First visit the Official iCloud Activation Lock Removal website following this link Here
• Then just find your iPhone or iPad unique IMEI code and send it
• Now just wait a bit until you receive the confirmation email saying that the Activation Lock has been Removed.

Once you do all the steps above you will be able to create a new iCloud account and the Find my iPhone option will be disabled.
This service works and can Remove or Unlock iCloud Lock on all iPhone 6, 6+, 5S, 5C, 5, 4S, 4 and iPad 4, 3, 2 Air 2 and also works on iOS.

iPhone/iPad Remove or Bypass iCloud Activation lock

You can now fast Unlock iCloud lock only with this service which iCloud Remover Company is offering. You can easily Bypass your iCloud lock and it works for all iPhone models from 6, 6 plus, 5S, 5C, 5, 4S, 2 to the oldest and it does not matter from where you have bought it because this service can help you remove the Activation screen lock or iCloud account Lock permanently.
So do not waste any more time and make your iPhone/iPad usable again only with our service for permanent and factory unlock of your iCloud locked iPhone/iPad.